|
|
Upper chain-wheel Kit
Applications: Kawasaki KLR650 '87 - Present
Manufacture: Top Gun Motorcycle Products
MMP P/N: 10102..............................................$39.95
Upper chain run control reduces excess chain slack during
suspension travel, which may increase chain and sprocket life,
and prevents the chain from rubbing the air box vent tube. A
"necessory" for street or off-road use! Kit includes bracket,
hardware and chain-wheel w/sealed bearings
|
|
|
Rear Shock Service/Rebuild
Application: Kawasaki KLR650 '87 - Present
Basic Service: Oil, Gas, High Quality Bump Rubber.....$64.50
Basic Service: with choice of spring.................................$134.50
Rebuild : "A" Model, '87 - '07 with choice of spring........$198.00
Rebuild: "A" Model '87 - '07 without spring....................$128.00
Rebuild: "E" Model '08 - present with choice of spring$194.50
Rebuild: "E" Model '08 - present without spring...........$124.50
* If buying new spring, we will return OEM spring for $20.
We've found that a Basic Service most often should actually be a
rebuild. We would like customer to pre-approve parts
replacement prior to sending shock. Replacement parts: Seal
Head ($48.50), "O" ring ($3.50).
|
|
|
KLR650 Shock Components
Applications: KLR650 '87 - Present
Manufacturer: Exclusive for MMP
MMP P/N: CG100 ..........................................$242.50
With your choice of spring.............................$312.50
Custom made KLR650 rear shock components made from the
highest quality materials. Designed to improve the stock
KLR650 shock to perform very closely to the same standards as
Ohlins when used with an MMP custom rear spring.
|
|
|
6.6 kg, 7.4 kg, and 8.0 kg Rear Shock Spring
Product: Improved Rear Shock Spring for the KLR650
Applications: Kawasaki KLR650 '87 - Present
Manufacture: Top Gun Motorcycle Products
MMP P/N: 10101(6.6kg)................................$79.50
MMP P/N: 10101-1(7.4kg)............................$79.50
MMP P/N: 10101-2(8.0kg)............................$79.50
Yellow 6.6kg, White 7.4kg, and Yellow 8.0kg springs made from
the highest quality materials and designed specifically for the
KLR650. Both springs can be installed from either end of the
shock. Sizing table click HERE. See shock spring installation
information HERE.
|
|
|
Shock Cover
Application: KLR650 all years
MMP P/N: 11490...........................................$19.95
Protects against harmful elements such as dirt, mud rock
and trail debris. Minimizes damage to shaft and seal. Allows
air circulation to reduce heat build-up. Washable and reusable.
Save money by extending service intervals.
NOTE: Swingarm must be clearanced to avoid tearing cover.
Picture HERE.
|
|
|
Progressive Fork Springs
Application: Kawasaki KLR650
MMP P/N: 1151 pre-2008.................................$112.50
MMP P/N: 1506 2008 - present ......................$112.50
Manufactured from high quality chrome silicon wire. Progressive
rate fork springs provide a plush ride while soaking up small
bumps and firm enough to absorb big bumps. Each spring is
carefully designed for each model motorcycle to reduce front end
dive under hard braking and still provide ride comfort. These
springs work well with Top Gun custom rear spring.
WARNING: For your safety, don't lower your KLR more than 1"
unless you disassemble and modify closing travel. Call MMP at
619 971-7952 for more info.
|
|
|
IMS Super Stock Pegs
Applications: Kawasaki KLR650 '87 - Present
Manufacture: IMS
MMP P/N: 10048....................................................$79.95
Provides better grip to hard sole motorcycle boots during wet or
muddy conditions.
|
|
|
KLR650 Shifter
Applications: Kawasaki KLR650 '87 - Present
Manufacture: MacDonald Products
MMP P/N: 10079 (stock length)..........................$22.95
MMP P/N: 10079-1(bigfoot).................................$22.95
Original MacDonald Products MFG shifter. Won't break like the
stock shifter. Now available in "Bigfoot" model, 3/4" longer but
still designed with case clearance in mind.
Note: Increased length of Bigfoot shifter puts shifter in front of
engine case beyond built-in shifter detent.
|
|
 |
|
|
|
Note: To properly install this yourself, you will
need a special M/C chain breaker and riveting
tool. Call for more info on this tool.
|
|
|
KLR650 Final Drive Chain
Applications: Kawasaki KLR650 '87 - Present
Manufacture: DID
MMP P/N: (see below)
The DID 520VM Gold Chain is the longest lasting drive chain we
have found for the KLR650 for both street and off road use.
106 links (stock & 15/44 gearing) MMP P/N:10028 $126.85
108 links (15/45 gearing) MMP P/N:10029 ............. $129.24
110 links (15/47 gearing) MMP P/N:10030 ..............$131.64
|
|
 |
|
|
|
We've used JT sprockets for years in Baja
and found they last longer than anything else
we have tried. JT sprockets uses high
carbon steel for rear sprockets and chromoly
steel alloy for front sprockets.
|
|
|
|
KLR650 Sprockets
Applications: Kawasaki KLR650 '87 - Present
Manufacture: JT Sprockets and others
MMP P/N: (see below)
Counter Shaft Sprockets ( KLR650 '90 - Present)
JT511-14T Counter Sprocket - MMP P/N:10033.. $21.50
JT511-15T Counter Sprocket - MMP P/N:10034.. $22.55
Counter Shaft Sprockets (KLR650 '87 - 89)
JT512-14T Counter Sprocket - MMP P/N:10070.. $16.83
JT512-15T Counter Sprocket - MMP P/N:10071.. $16.83
Rear Sprockets (KLR650 '87 - Present)
JT487-43T Rear Sprocket - MMP P/N:10035....... $39.30
JT487-44T Rear Sprocket - MMP P/N:10036....... $40.96
JT487-47T Rear Sprocket - MMP P/N:10038....... $43.70
Parts Unlimited (KLR650 '97-Present)
45T Rear Sprocket - MMP P/N: CT217 ................ $41.25
Note: The following sprocket is not mfg by JT sprockets and is
sold w/o any cutouts. Recommended for special applications
only. (Street riders should stay with a 44T)
|
|
|
Rim locks
Applications: Most Multisurface Motorcycles
Manufacture: Motion Pro
MMP P/N: 10019
Motion Pro rim lock keeps the tire from spinning on the rim
during hard acceleration or braking when running low air
pressure for off road conditions. See article for more info
Rim Lock, 1.60" Frt - MMP P/N:10049............$8.50
Rim Lock, 1.85" Frt - MMP P/N:10050............$8.50
Rim Lock, 2.50" Rear - MMP P/N:10051.......$9.50
|
|
|
Yuasa Maintenance Free Battery
Applications: Kawasaki KLR650 '87 - Present
Manufacture: Yuasa
MMP P/N: 10053....................................................$88.99
Originally these required some modification to get them to fit the
KLR650, but the latest versions from Yuasa slip right in. We have
one of these that is over 5 years old that has seen several
thousand off-road miles in Baja and is still kicking!
|
